Using the Electronic Pulse Therapy device is simple and can be done in a few easy steps:

1. insert the adapter pin into the device to ensure it has a stable power supply.
2. Take the electrode wire and plug one end into the output port located at the top of the machine.
3. Attach the other ends of the wire to the two reusable gel pads.
4. Peel off the plastic backing from the pads
5. Place them firmly onto the clean skin of the area where you feel pain or tension.
6. Once the pads are in place.
7. Turn the intensity control scroller on the side to switch the device on; the red Power LED will light up to show it is active
8. Use the two Mode Selection buttons on the front to choose the type of massage or pulse pattern you prefer,
9. Watching the function LEDs to see which mode is selected.
10. Slowly turn the stroller wheel to increase the strength until the pulses feel comfortable and effective for you.
11. After your session, turn the scroller back to the off position.
12. Remove the pads, and place them back on their plastic sheets for next time.
13. Take 1 glass of lukewarm water or tepid water after use of EPT

.